IPM Meaning in Advertising: Installs Per Mille Explained
IPM (installs per mille) counts installs per thousand ad impressions. This guide covers the formula, how it relates to CTR and CPI, and how to read it without fooling yourself.
Key takeaways - IPM (installs per mille) is the number of installs you get per 1,000 ad impressions. It is calculated as installs divided by impressions, multiplied by 1,000. - IPM combines two steps: how many people click (CTR) and how many of those clicks turn into installs. A creative can lose on one and still win overall. - It is most useful as a comparison inside one campaign: same network, geo, platform, placement and time window. It is not a universal score. - IPM does not measure install quality or cost. Always read it next to CPI and a post-install metric such as retention or a key in-app event. - Small samples and mixed formats are the usual reasons a "winning" IPM turns out to be noise.
What IPM means
IPM stands for installs per mille. "Mille" is Latin for a thousand, the same root as the M in CPM. So IPM answers a simple question: for every thousand times this ad was shown, how many people installed the app?
You will see it most in mobile game and app user acquisition, where installs are the goal and impressions are the unit most networks bill and report in. If you run playable ads, video ads, or static banners across several networks, IPM gives you one number to line up creatives against each other.
The formula
The calculation is:
IPM = (installs ÷ impressions) × 1,000
The multiplication is only there to make the number readable. Install rates per single impression are tiny fractions. Scaled to a thousand impressions, they become figures you can compare at a glance.
IPM also breaks down into two earlier steps:
IPM = CTR × click-to-install rate × 1,000
- CTR is the share of impressions that become clicks.
- Click-to-install rate is the share of clicks that end with an install. Depending on the platform, this includes the store page and the download.
That breakdown matters more than the headline number. Two creatives can have a similar IPM for very different reasons. One might get a lot of curious taps that mostly bounce off the store page. The other might get fewer taps from people who already understand the product. Knowing which one you have tells you what to change next.
IPM next to the other metrics
IPM sits in a family of related terms. It helps to know where each one fits.
- CTR (click-through rate): clicks per impression. It tells you whether the creative earns attention and a tap. It says nothing about what happens afterward.
- CVR (conversion rate): here, usually clicks that become installs.
- CPI (cost per install): spend divided by installs. This is what your budget feels.
- eCPM (effective cost per mille): revenue or cost per thousand impressions. On the buy side it is the bridge between what you pay per install and what the network earns per thousand impressions.
- Retention and in-app events: whether the people you acquired actually use the product.
IPM is the link between the creative and the economics. On networks where you bid on installs, a creative that converts impressions into installs more efficiently can usually be served more profitably for the same bid. That is why networks and UA teams both pay attention to it. If you want the longer argument for which of these metrics to trust, see IPM vs CTR for playable ads.
Why IPM matters for playable ads
A playable ad lets the viewer try a slice of the game or app before deciding. That changes the funnel in a few ways.
- Fewer casual taps. A person who has already played for several seconds knows what the product is. The tap that follows is more deliberate.
- CTR can look modest while IPM looks strong. If you judged only on CTR, you might discard a creative that is actually sending better-informed people to the store.
- The creative does more of the qualifying. The gameplay in the ad acts as a filter, so the people who install are more likely to be the ones who wanted that kind of experience.
The reverse is also true. A playable with a confusing first few seconds can have a poor IPM because people never understood what to do, so they never reached the point of wanting the game. How you teach the mechanic often decides the result. We cover that in playable ad tutorial design.
How to read IPM without fooling yourself
IPM is easy to compute and easy to misread. A few habits keep it honest.
Compare like with like
Only compare IPM across creatives when these match as closely as you can get them:
- Network and placement (rewarded, interstitial, banner)
- Country or region
- Operating system
- Date range
- Bid or optimization goal
- Attribution window
A creative served in a high-intent geo on one network will often beat the same creative elsewhere, for reasons that have nothing to do with the creative. Likewise, an outside "typical IPM" figure is rarely useful. Each network, placement and genre has its own range, and attribution rules differ between platforms. Your own earlier campaigns are a far better baseline than a number from the internet.
Wait for enough impressions
IPM is built from rare events. Installs are a small fraction of impressions, so with low volume a handful of installs can swing the number a long way. If one creative has had far fewer impressions than another, a higher IPM is not evidence yet. Let both run until the difference stays stable across several days rather than reacting to the first morning's data.
Change one thing at a time
If you swap the hook, the end card and the call to action in one go, and IPM moves, you have learned very little. Test one variable per round. Typical candidates are the opening scene, the length of the interactive section, the end card layout, or the call-to-action wording.
Look beyond the install
IPM stops at the install. A creative that over-promises can inflate it. If the ad shows gameplay the product does not really have, you may get installs that churn immediately. Pair IPM with cost per install and a retention or event metric before you scale. There is also a policy angle, covered in misleading playable ads, because a playable that misrepresents the product can cause problems beyond poor retention.
What tends to move IPM in a playable
None of these are guarantees, and results depend on the product. They are the places experienced producers look first.
- Time to first interaction. If the viewer waits or has to guess, many leave. Make the first action obvious and quick.
- A single clear mechanic. Showing one satisfying loop usually works better than a feature tour.
- A believable match with the store page. The ad, store icon and screenshots should feel like the same product.
- The end card. A clear call to action after the interactive part gives people a natural moment to install.
- Technical reliability. A playable that loads slowly or breaks on some devices wastes impressions. Self-contained packaging helps here. See what an HTML5 ad contains and self-contained HTML5 ads.
IPM over time: watch for fatigue
IPM for a given creative rarely stays flat. As the same audience sees the same ad repeatedly, response usually fades. A falling IPM with stable targeting is one of the earlier signals that a creative is wearing out. You can usually see it before spend or CPI makes it painful.
When that happens, avoid rebuilding the whole ad. Often a new opening, a different level, or a revised end card is enough to refresh it. Ad creative fatigue: spot it early and know what to swap goes through the common signals and sensible first changes.
A practical routine
- Define the comparison: one network, one geo, one platform, one placement.
- Run two to four creatives at the same time rather than one after another, so timing does not skew the comparison.
- Record impressions, CTR, click-to-install rate, IPM and CPI for each.
- Wait for enough volume that the order of creatives stops changing day to day.
- Check retention or an in-app event on the leading creative before you scale it.
- Change a single variable in the winner and test again.
Producing those variants is often the bottleneck. A tool such as PlayableRun can turn a store listing into an HTML5 playable you can export as a Google Ads-ready ZIP, which makes it cheaper to test more than one idea. It is a convenience for the production side, not a substitute for the testing discipline above.
Quick glossary
- Impression: one time the ad is shown (the exact counting rule varies by network).
- Install: a first-time download and open, as defined by your attribution setup.
- Mille: a thousand.
- Attribution window: the period after an impression or click during which an install can still be credited to the ad.
If you want to see what a finished playable looks like before you decide whether to build one, the live demos are the quickest way. When you are ready to try it on your own listing, you can create a free account.
Frequently asked questions
›What does IPM stand for in advertising?
IPM stands for installs per mille, meaning installs per thousand impressions. "Mille" is Latin for thousand, the same root as the M in CPM.
›How do you calculate IPM?
Divide installs by impressions, then multiply by 1,000. Equivalently, multiply click-through rate by the click-to-install rate, then by 1,000.
›Is a higher IPM always better?
Usually, but not automatically. A higher IPM means more installs per impression served, but it says nothing about install quality, retention, or cost. Read it alongside CPI and post-install events.
›What is a good IPM?
There is no universal number. IPM varies by network, placement, country, platform, game genre and attribution window. Compare creatives against each other under the same conditions rather than against an outside benchmark.
›Why do playable ads get judged on IPM instead of CTR?
A playable lets people try the product before they tap install, so clicks are often fewer but more intentional. CTR alone can undersell that. IPM captures the whole path from impression to install.
Turn your store listing into a playable
Paste an App Store or Google Play link and get an HTML5 playable you can test in minutes. The first one is free.
Keep reading
- Glossary
What Is MRAID? The Playable Ad API Explained
7 min read
- Glossary
What Is Exit API in Google Ads? A Plain Guide
7 min read
- Glossary
What Is clickTag? A Plain-English Guide for HTML5 Ads
7 min read